Photos from exact eBay item 177050826793 · seller-provided
Best for: Trained operators making straight, centered lifts within the exact 1/2-ton rating from a verified capacity-rated support
JET stock 101900 / model S90-050-10 is the 1/2-ton S90 hand chain hoist configured with a 10-foot lift and a single-fall load chain.
JET S90-050-10 1/2-Ton Hand Chain Hoist with 10-Foot Lift (101900)
Listing price and stock checked August 2, 2026. Confirm both with the seller at checkout.Choose this exact complete 101900 hoist only after verifying its identity, condition, inspection history, support and planned lift. It is not the 15-foot 101901, the one-ton 101910, a service part or a generic chain fall. The design balances sturdy construction with the handling demands of its intended user. Value is strongest for buyers who will use its specific capabilities rather than pay for unused range. Service, fit, and accessory requirements deserve the same attention as the product's main specification.
Quality: The design balances sturdy construction with the handling demands of its intended user.
Value: Value is strongest for buyers who will use its specific capabilities rather than pay for unused range.
Ownership: Service, fit, and accessory requirements deserve the same attention as the product's main specification.
Confirm JET stock 101900 and model S90-050-10 on the exact complete hoist before purchase. The 101901 / S90-050-15 is a distinct 1/2-ton model with a 15-foot lift, while the 101910 / S90-100-10 is a distinct one-ton model. Reject replacement chains, hooks, latches, brake parts, incomplete or parts-only units, and generic half-ton hoists that do not prove the exact manufacturer, stock number, model and 10-foot configuration. Verify the seller, nameplate and rated-load markings, lift, complete housing, hand and load chains, hooks and latches, brake, condition, modification status, inspection and service history, and package contents. The recorded 26-pound figure is the tool weight, not a shipping or supported-load allowance. This model has no overload protection; do not treat hand-chain resistance, the 58 lbf rated-capacity pull figure, or the 32-foot-per-foot overhaul figure as a load indicator or permission to exceed its 1/2-ton rating. Before use, read and follow the current JET manual, ensure the operator is trained, confirm the suspension point and support are rated for the hoist plus load, and complete the required inspection. Keep the load centered with the chains straight. Do not side load, lift people, pass or suspend loads over people, exceed capacity, or pull the hand chain with powered equipment. Stop and use manufacturer service guidance if identity, condition, inspection, operation or support is uncertain. No trolley, beam clamp, sling, load, rigging hardware, replacement part, inspection certification or other accessory is implied unless the exact seller listing states it.
Best for: Moving tile, glass, sheet goods, and textured slabs
A battery-powered handheld vacuum lifter that monitors vacuum and maintains grip on many nonporous and textured materials.
Best for: Controlled lifting of suitable flat ferrous stock
A lever-operated permanent magnet intended for moving compatible steel without external power.
Best for: Holding steel parts during fit-up and tack welding
A switchable magnetic workholding square for positioning ferrous parts at common angles.